Electronics Technician – Petroleum (Pump Systems Support)
2026-03-09T09:40:59+00:00
K&G Engineering and Services
https://www.greatmalawijobs.com/jsjobsdata/data/employer/comp_4820/logo/K&G%20Engineering%20and%20Services.jpeg
https://www.greatmalawijobs.com/jobs/
FULL_TIME
Blantyre, Malawi (with travel to project sites nationwide)
Blantyre
10101
Malawi
Engineering
Science & Engineering, Installation, Maintenance & Repair, Energy & Mining
2026-03-13T17:00:00+00:00
8
1. General Information
K&G Engineering and Services is a petroleum-focused engineering company engaged in fuel pump installation and maintenance, tank infrastructure development, and electrical and mechanical systems integration. The company seeks a qualified Electronics Technician to support petroleum pump systems, working closely with the Pump Technician to ensure reliable and safe fuel station operations.
2. Position Purpose
The Electronics Technician – Petroleum is responsible for installation, configuration, maintenance, and troubleshooting of electronic systems associated with fuel dispensers, pump controllers, automation interfaces, and related petroleum infrastructure.
The role supports the Pump Technician in ensuring accurate pump calibration, system integration, electronic diagnostics, and overall operational efficiency of petroleum dispensing systems.
3. Reporting Structure
Reports To:
- Projects and Maintenance Engineer
- Maintenance & Operations Manager
Works Closely With:
- Pump Technician
- Petroleum General Fitters
- Welding & Fabrication Technicians
- Safety Officer
- Site Supervisors and Client Representatives
4. Key Duties and Responsibilities
4.1 Installation & Commissioning
- Install and configure electronic components of fuel dispensers and pump control systems.
- Connect and program pump interface boards, communication modules, and control units.
- Conduct functional testing and assist in commissioning of fuel dispensing systems.
4.2 Maintenance & Troubleshooting
- Diagnose and repair electronic faults in dispensers, control boards, displays, and sensors.
- Troubleshoot communication failures between pumps, controllers, and monitoring systems.
- Perform preventive maintenance on electronic systems of petroleum infrastructure.
- Support calibration of electronic meters and pump accuracy systems.
- Respond promptly to breakdown calls and support the Pump Technician during field repairs.
4.3 Pump & Tank Electronic Systems
- Monitor and troubleshoot electronic leak detection systems.
- Test and verify pump display units, pulser systems, and data transmission components.
- Assist in upgrading firmware and configuring system parameters where required.
- Support electronic integration of new pumps and tank systems during installations.
4.4 Quality Assurance & Compliance
- Ensure all electronic installations meet petroleum safety standards.
- Verify proper cable management and secure mounting of electronic components.
- Conduct pre-commissioning electronic diagnostics and validation tests.
- Maintain accurate service reports and fault records.
4.5 Safety & Environmental Compliance
- Follow strict safety procedures in hazardous petroleum environments.
- Observe lockout/tagout procedures when working with powered systems.
- Use intrinsically safe tools where required.
- Immediately report unsafe conditions, fuel leaks, or electrical hazards.
4.6 Documentation & Reporting
- Record diagnostics, software configurations, and repair actions taken.
- Document spare parts used and submit requisitions for approvals.
- Provide daily and weekly technical reports to supervisors.
- Maintain accurate maintenance logs for each assigned site.
5. Qualifications, Experience, and Knowledge
5.1 Academic and Professional Qualifications
- MSCE (Malawi School Certificate of Education)
- Grade 1 Trade Test Certificate in Electronics, Electrical & Electronics Engineering, or related field
- OR
- Diploma in Electronics Engineering, Mechatronics, or related discipline
5.2 Experience
- Minimum 3–7 years’ experience in electronics installation and maintenance.
- Proven experience working with fuel dispensers, pump electronics, or industrial control systems is an added advantage.
- Experience with automation systems, sensors, and control boards.
- Experience in hazardous area environments is an advantage.
5.3 Knowledge and Skills
- Strong understanding of electronic control boards and pump interface systems.
- Knowledge of tank gauging systems and fuel management systems.
- Ability to read and interpret electronic schematics and wiring diagrams.
- Basic knowledge of networking and communication protocols used in fuel stations.
- Strong diagnostic and troubleshooting skills.
- Ability to work under minimal supervision and collaborate effectively with the Pump Technician.
6. Key Competencies
- High technical competence in pump and tank electronic systems
- Strong analytical and fault-finding skills
- Good teamwork and coordination skills
- Strong safety awareness in hazardous environments
- Attention to detail and accuracy
- Good communication and reporting skills
- Ability to work under pressure and meet deadlines
* Install and configure electronic components of fuel dispensers and pump control systems. * Connect and program pump interface boards, communication modules, and control units. * Conduct functional testing and assist in commissioning of fuel dispensing systems. * Diagnose and repair electronic faults in dispensers, control boards, displays, and sensors. * Troubleshoot communication failures between pumps, controllers, and monitoring systems. * Perform preventive maintenance on electronic systems of petroleum infrastructure. * Support calibration of electronic meters and pump accuracy systems. * Respond promptly to breakdown calls and support the Pump Technician during field repairs. * Monitor and troubleshoot electronic leak detection systems. * Test and verify pump display units, pulser systems, and data transmission components. * Assist in upgrading firmware and configuring system parameters where required. * Support electronic integration of new pumps and tank systems during installations. * Ensure all electronic installations meet petroleum safety standards. * Verify proper cable management and secure mounting of electronic components. * Conduct pre-commissioning electronic diagnostics and validation tests. * Maintain accurate service reports and fault records. * Follow strict safety procedures in hazardous petroleum environments. * Observe lockout/tagout procedures when working with powered systems. * Use intrinsically safe tools where required. * Immediately report unsafe conditions, fuel leaks, or electrical hazards. * Record diagnostics, software configurations, and repair actions taken. * Document spare parts used and submit requisitions for approvals. * Provide daily and weekly technical reports to supervisors. * Maintain accurate maintenance logs for each assigned site.
* Strong understanding of electronic control boards and pump interface systems. * Knowledge of tank gauging systems and fuel management systems. * Ability to read and interpret electronic schematics and wiring diagrams. * Basic knowledge of networking and communication protocols used in fuel stations. * Strong diagnostic and troubleshooting skills. * Ability to work under minimal supervision and collaborate effectively with the Pump Technician. * High technical competence in pump and tank electronic systems * Strong analytical and fault-finding skills * Good teamwork and coordination skills * Strong safety awareness in hazardous environments * Attention to detail and accuracy * Good communication and reporting skills * Ability to work under pressure and meet deadlines
* MSCE (Malawi School Certificate of Education) * Grade 1 Trade Test Certificate in Electronics, Electrical & Electronics Engineering, or related field * Diploma in Electronics Engineering, Mechatronics, or related discipline
JOB-69ae95abd93f5
Vacancy title:
Electronics Technician – Petroleum (Pump Systems Support)
[Type: FULL_TIME, Industry: Engineering, Category: Science & Engineering, Installation, Maintenance & Repair, Energy & Mining]
Jobs at:
K&G Engineering and Services
Deadline of this Job:
Friday, March 13 2026
Duty Station:
Blantyre, Malawi (with travel to project sites nationwide) | Blantyre
Summary
Date Posted: Monday, March 9 2026, Base Salary: Not Disclosed
Similar Jobs in Malawi
Learn more about K&G Engineering and Services
K&G Engineering and Services jobs in Malawi
JOB DETAILS:
1. General Information
K&G Engineering and Services is a petroleum-focused engineering company engaged in fuel pump installation and maintenance, tank infrastructure development, and electrical and mechanical systems integration. The company seeks a qualified Electronics Technician to support petroleum pump systems, working closely with the Pump Technician to ensure reliable and safe fuel station operations.
2. Position Purpose
The Electronics Technician – Petroleum is responsible for installation, configuration, maintenance, and troubleshooting of electronic systems associated with fuel dispensers, pump controllers, automation interfaces, and related petroleum infrastructure.
The role supports the Pump Technician in ensuring accurate pump calibration, system integration, electronic diagnostics, and overall operational efficiency of petroleum dispensing systems.
3. Reporting Structure
Reports To:
- Projects and Maintenance Engineer
- Maintenance & Operations Manager
Works Closely With:
- Pump Technician
- Petroleum General Fitters
- Welding & Fabrication Technicians
- Safety Officer
- Site Supervisors and Client Representatives
4. Key Duties and Responsibilities
4.1 Installation & Commissioning
- Install and configure electronic components of fuel dispensers and pump control systems.
- Connect and program pump interface boards, communication modules, and control units.
- Conduct functional testing and assist in commissioning of fuel dispensing systems.
4.2 Maintenance & Troubleshooting
- Diagnose and repair electronic faults in dispensers, control boards, displays, and sensors.
- Troubleshoot communication failures between pumps, controllers, and monitoring systems.
- Perform preventive maintenance on electronic systems of petroleum infrastructure.
- Support calibration of electronic meters and pump accuracy systems.
- Respond promptly to breakdown calls and support the Pump Technician during field repairs.
4.3 Pump & Tank Electronic Systems
- Monitor and troubleshoot electronic leak detection systems.
- Test and verify pump display units, pulser systems, and data transmission components.
- Assist in upgrading firmware and configuring system parameters where required.
- Support electronic integration of new pumps and tank systems during installations.
4.4 Quality Assurance & Compliance
- Ensure all electronic installations meet petroleum safety standards.
- Verify proper cable management and secure mounting of electronic components.
- Conduct pre-commissioning electronic diagnostics and validation tests.
- Maintain accurate service reports and fault records.
4.5 Safety & Environmental Compliance
- Follow strict safety procedures in hazardous petroleum environments.
- Observe lockout/tagout procedures when working with powered systems.
- Use intrinsically safe tools where required.
- Immediately report unsafe conditions, fuel leaks, or electrical hazards.
4.6 Documentation & Reporting
- Record diagnostics, software configurations, and repair actions taken.
- Document spare parts used and submit requisitions for approvals.
- Provide daily and weekly technical reports to supervisors.
- Maintain accurate maintenance logs for each assigned site.
5. Qualifications, Experience, and Knowledge
5.1 Academic and Professional Qualifications
- MSCE (Malawi School Certificate of Education)
- Grade 1 Trade Test Certificate in Electronics, Electrical & Electronics Engineering, or related field
- OR
- Diploma in Electronics Engineering, Mechatronics, or related discipline
5.2 Experience
- Minimum 3–7 years’ experience in electronics installation and maintenance.
- Proven experience working with fuel dispensers, pump electronics, or industrial control systems is an added advantage.
- Experience with automation systems, sensors, and control boards.
- Experience in hazardous area environments is an advantage.
5.3 Knowledge and Skills
- Strong understanding of electronic control boards and pump interface systems.
- Knowledge of tank gauging systems and fuel management systems.
- Ability to read and interpret electronic schematics and wiring diagrams.
- Basic knowledge of networking and communication protocols used in fuel stations.
- Strong diagnostic and troubleshooting skills.
- Ability to work under minimal supervision and collaborate effectively with the Pump Technician.
6. Key Competencies
- High technical competence in pump and tank electronic systems
- Strong analytical and fault-finding skills
- Good teamwork and coordination skills
- Strong safety awareness in hazardous environments
- Attention to detail and accuracy
- Good communication and reporting skills
- Ability to work under pressure and meet deadlines
Work Hours: 8
Experience in Months: 36
Level of Education: professional certificate
Job application procedure
Interested in applying for this job? Click here to submit your application now.
Application Process
Interested and qualified candidates should submit their application letter, detailed CV, copies of certificates, and three traceable referees to:
Projects and Maintenance Engineer
K&G Engineering and Services
P/Bag 37
Lilongwe, Malawi
All Jobs | QUICK ALERT SUBSCRIPTION
